PMB
Model Boats
contact
phone 07842
634090
Fast
Electrics
Home
Parts hardware Octura Propellers Flexishafts
| PLEASE NOTE. DURING THESE DIFFICULT TIMES, WE ARE WORKING AS NORMAL, SHIPPING OUT ORDERS WITHIN 2 WORKING DAYS. |
|
|||
| V48 | SR48 Ready to Run self righting
boat complete with transmitter, boat battery and charge lead 446mm long
This new self-righting boat - it will always end up the right way up -
manages a quick 30km/h and features a fully sealed, impact resistant ABS
monohull.
Radio system is 2.4Ghz so interference free and has a 300 metre range.
Spec: 446mm long
- Motor Size: 390A - Servo: 9-gram Servo - Battery: 7.4V 850mAh Li-ion (Included) - Radio: 2.4GHz marine radio system (Included) - Charger: 3 Pin UK Mains Charger - Minimum Age Recommendation: 10 years |
 
 |
£57.95
|
| V65 | The
Vector SR65 665mm long, will have you racing across your local pond or
lake looking like a powerboating pro in no time. Incredibly fast and breathtakingly exciting the SR65's speed is generated by a powerful pre-installed water-cooled brushed motor and 30A water-cooled, waterproof ESC. Supplied RTR (Ready-To-Run) with battery and USB charge lead the Vector comes 100% factory-assembled and features a durable ABS hull with eye-catching pre-applied graphics. The included 2-channel 2.4GHz radio combo has fully proportional steering and throttle control leaving nothing to buy but 4 AA batteries for the transmitter. Get one and you'll be making waves within minutes of opening the box. |
 |
£99.95
|
| V65B | The
Vector SR65 Brushless 665mm long, will have you racing across your local pond or
lake looking like a powerboating pro in no time. Incredibly fast and breathtakingly
exciting the SR65's speed is generated by a powerful pre-installed
water-cooled 2600kv brushless motor and water-cooled, waterproof ESC. Supplied RTR (Ready-To-Run) The Vector comes 100% factory-assembled and features a durable ABS hull with eye-catching pre-applied graphics. The included 2-channel 2.4GHz radio combo has fully proportional steering and throttle control leaving nothing to buy but 4 AA batteries for the transmitter. Get one and you'll be making waves within minutes of opening the box. |
|
no
stock £149.95
|
| HYD4 | Deal 2 PNF HYDRA 850 carbon/kevlar
or full carbon mono 850mm long epoxy vacuum
infusion moulded high speed racing mono. Supplied as a kit with all hardware, 3674
high speed brushless motor and 90A esc. This is a full race boat and capable
of very high speeds. Other parts needed , 2 channel radio control,
standard size servo and Lipo battery
UPGRADE to 4082 motor and 150A ESC |
 |
NO
STOCK £499.00
|
| HYD3 | HYDRA 850 carbon mono 850mm long carbon fibre epoxy vacuum infusion moulded high speed racing mono. |
|
No stock £299.00 |
| KRKE | Kraken E Bare hull Deep V mono. 51" long. Kraken E (EK) Carbon/Kevlar Epoxy Semiscale offshore version of Kraken for fast electric. Carbon/kevlar epoxy hull and clear glass/epoxy engine cover. |
|
£395.00 |
| KRKE1 | Kraken E ARTR DEAL 1. Deep V mono. 51" long. Prebuilt. Kraken E (EK) Carbon/ Kevlar Epoxy Semiscale offshore version of Kraken for fast electric. Carbon/kevlar epoxy hull and clear glass/epoxy engine cover. Built with 5692 watercooled 7 bhp motor, 180 Amp ESC, all motor mounts, shaft, rudder, turn fins, prop etc fitted. Normally £1175.00 |
|
£1075.00 |
| KRKE2 | Kraken E ARTR DEAL 2. Deep V mono. 51" long. Prebuilt. Kraken E (EK) Carbon/ Kevlar Epoxy Semiscale offshore version of Kraken for fast electric. Carbon/kevlar epoxy hull and clear glass/epoxy engine cover. Built with 56104 650kv watercooled 8.5 bhp bhp motor, 300 Amp ESC, all motor mounts, shaft, rudder, turn fins, radio box, prop etc fitted. Normally £1350.00 | 
|
£1250.00 |
| M2 | MINI RIGGER 492mm long laser cut kit of all parts shown including carbon sponson tubes. Can built using cyano superglue or epoxy glue. All hardware available. |
|
£37.50 |
| M3 | COMPLETE KIT MINI RIGGER WITH HARDWARE 492mm long laser cut kit of all parts shown including carbon sponson tubes. Can built using cyano superglue or epoxy glue. All hardware is included, brushless motor, esc ,shaft , coupling, rudder, servo, watercooling tube, water outlet, prop |
|
£137.50 |
|
EM2 |
Complete sterring waterjet with 39mm impeller. Includes coupling and motor mount. Suitable for 36mm diameter brushless motors (BL4A) around 2000kv. This can be fitted to any shallow or deep V mono type hull around 750mm (32 inches) to 1000mm (40 inches) long |
|
£59.95 |
|
EM60 |
Complete Surface Drive Flexi-shaft assembly for dog drive 4mm bore props with 4mm flexishaft for 540/700 size motors and similar brushless. Suitable for Hydro's, Deep V’s and Catamarans. Contains 4mm square ended Flexi-shaft with separate 4mm square drive steel stub-shaft, drive dog, PTFE teflon tube, strut with lead/teflon bushes, brackets and all nuts, bolts needed. Flexi and stub is 310mm long but can be cut down to length. Longer lengths can be supplied |
|
£35.95 |
| EM60B | Same 4mm shaft setup as EM60 but with stinger drive for mono v boats. |  |
£37.95 |
|
.EM60C |
.Same setup as EM60 but with strut
and rudder inline. Contains 4mm square ended Flexi-shaft with separate 4mm square drive steel stub-shaft, drive dog, PTFE teflon tube, strut with lead/teflon bushes, brackets and all nuts, bolts needed. Flexi and stub is 310mm long but can be cut down to length. |
. |
£46.95 |
|
.EM60D |
.Same setup as EM60C
but with 3/16 shaft Contains 3/16 welded Flexi-shaft , drive dog, PTFE teflon tube, strut with lead/teflon bushes, brackets and all nuts, bolts needed. Flexi and stub is 400mm long but can be cut down to length. |
. |
£49.95 |
| EM60E | 3/16"
(4.85mm). Full set with 21.5 inch (540mm) flexishaft and stub shaft, drive
dog, brass tube, cnc machined aluminium strut with lead teflon bearings. Suitable for mono's, cats and hydro brushless motors up to 4000 watts. Use with EM80 or EM81 rudder |
 |
£38.90 |
| EM79A | Wedge rudder for surface drive fast electrics or .12 to .18 engines. Built in waterscoop, highly polished CNC machined aluminium. Small rudder assembly with 78mm long rudder blade, leading edge 42mm from the transom. |  |
£7.95 |
| EM80 | Wedge rudder for surface drive fast electrics or .12 to .18 engines. Built in waterscoop, highly polished CNC machined aluminium. Small rudder assembly with 95mm long rudder blade, leading edge 42mm from the transom. | |
£8.25 |
| EM81 | Built in waterscoop, highly polished CNC machined aluminium. Medium rudder assembly with 130mm (5") long rudder blade and 76mm transom to front of rudder blade. |  |
£18.95 |
| EM86 | Built in waterscoop, highly polished CNC machined aluminium. Offset rudder and strut assembly. |  |
£32.95 |
| EM47 | Flex hex steel coupling 3.2mm to 3.2mm cable. |  |
£7.95 |
| EM48 | Flex hex steel collet type coupling 3.2mm to 4mm cable. This is a collet type coupling | |
£7.95 |
| EM49 | Flex hex steel collet type coupling 4mm to 3.2mm cable. This is a collet type coupling | |
£7.95 |
| EM49A | Flex hex steel collet type coupling 5mm to 3.2mm cable. This is a collet type coupling | |
£7.95 |
| EM50 | Flex hex steel collet type coupling 4mm to 4mm cable. This is a collet type coupling | |
£7.95 |
| EM52 | Flex hex steel collet type coupling 5mm to 4mm cable. This is a collet type coupling |
 |
£7.95 |
| EM54 | Flex hex steel collet type coupling 5mm plain to 3/16 flexi. This is a collet type coupling |
|
£7.95 |
| EM58A | Flex hex steel collet type coupling 6mm motor to 3/16 cable. This is a collet type coupling |
|
£14.95 |
| EM58B | Flex hex steel collet type coupling 6mm motor to 1/4 flexi cable. This is a large strong collet type coupling for big brushless motors |
|
£14.95 |
| EM58C | Flex hex steel collet type coupling 5mm motor to 1/4 flexi cable. This is a large strong collet type coupling for big brushless motors |
|
£14.95 |
| EM58D | Flex hex large stainless steel collet type coupling 8mm plain to 1/4 flex cable. This is a collet type coupling |
|
£12.95 |
| EM58E | Flex hex large stainless steel collet type coupling 10mm plain to 1/4 flex cable. This is a collet type coupling |
|
£14.95 |
| EM58F | Flex hex large stainless steel collet type coupling 8mm plain to 3/16 flex cable. This is a collet type coupling |
|
£12.95 |
| HF32A | Flexishaft 2mm flexi with welded3.2 mm stainless steel stub shaft. 300mm long. Replacement shaft for EM60, EM60B, EM60C | . |
£12.50
|
| HF33A | UPRATED Flexishaft 3.2mm flexi with welded 4mm stainless steel stub shaft. 300mm long. | . |
£11.50
|
| HF34 | UPRATED Flexishaft 4mm flexi with welded 4mm stainless steel stub shaft. 320mm long. | . |
£11.50
|
| HF35 | UPRATED Flexishaft 3/16 flexi with welded 3/16 stainless steel stub shaft. 540mm long. | . |
£15.95
|
| .EM108 | 1 aluminium tapered nut M4 thread for 4mm propshafts | . |
£2.50 |
| .EM110 | Brass and teflon tube for 3.6mm and 4mm flexishafts EM60 and EM60B. 300mm long | . |
£5.00 |
| .EM111 | Brass and teflon tube for 3/16 flexishafts 430mm long | . |
£9.95 |
| .EM110A | teflon tube for 4mm shafts 1 metre long | . |
£11.00 |
| .EM111A | teflon tube for 3/16mm shafts 1 metre long | .
|
£7.95 |
| .EM112 | 4mm stubshaft for EM60 and EM60B. Square hole on one end for the flexi cable | . |
£4.50 |
| .EM113A | 4mm flexishaft with squared end for EM60 and EM60B | . |
£7.50
|
| .EM113B | 3/16" ( 4.87mm) flexishaft with squared end for Mini Lynx and Pursuit etc. 300mm long but can be cut down to fit other boats. | . |
£8.95
|
| EFWA | 4mm id teflon thrust washers (10) | . |
£2.85 |
| .HF88 | 3/16 id lead teflon replacement shaft bushes | . |
£2.95 |
| .EM114 | 4mm lead teflon replacement shaft bushes | . |
£2.95 |
|
EM73 |
Drive dog for 3/16 flexi and electrics. |
 |
£2.25 |
|
HF144 |
Drive dog for 4mm flexishaft |
|
£1.95 |
| EM76 | 3/16 (4.87mm) bore teflon thrust washers. 10 pieces | . |
£3.00 |
| HF141 | 2 x mini Turn fin with CNC aluminium blades 52mm long | . |
£8.90 |
| EM103 | Mini trim tabs (2) for fast electric with screw adjustment. Each tab is 30mm wide 37mm long. | . |
£7.95 |
| EM105 | Watercooled motor mount for 380 to 600 motors and brushless with bolt spacings of 16mm up to 25mm. Adjustable for angle CNC machined motor mount. Aluminium mount with G10 epoxy side brackets. | . |
£7.85 |
| EM106 | WATERCOOLED Motor mount for 36mm diameter motors such as BL4. Adjustable for angle CNC machined motor mount. Aluminium mount with G10 epoxy side brackets. | . |
£10.95 |
| EM107 | WATERCOOLED Motor mount for 40mm diameter motors such as BL6. Adjustable for angle CNC machined motor mount. Aluminium mount with G10 epoxy side brackets. | . |
£10.95 |
| EM109 | Heavy duty motor mount for 56 series motors such as 5692, 5682, CNC machined in aluminium and G4 epoxy side plates, including mounting plate for the ESC. | .
 |
£35.95 |
| EM122 | 28mm inside diameter waterjacket for 28 series motors. | . |
£9.00 |
| EM123 | 29mm inside diameter waterjacket for 29 series motors. | . |
£9.00 |
| EM124 | 36mm inside diameter waterjacket for 36 series motors. | . |
£8.95 |
| EM125 | 40mm inside diameter waterjacket for 40 series motors. | . |
£8.95 |
| EM126 | 56mm inside diameter waterjacket for 56 series motors.65mm long | . |
£15.95 |
