PMB
PRESTWICH RC Model boats
HOME
flex shafts
engine mounts
gas pipes email
phone 07842634090
GENERAL RC BOAT PARTS
| This section contains rc rubber bellows seals, watercooling and exhaust nipples, pushrods, quicklinks, rc ball joints, exhaust silicone, fuel tube, watercooling tube, hatch fixings and clips, carbon plate and angle, deck handles and hooks, rubber sealing tape, rc boat aerials, airscoops, servo mounts, exhaust mountings, water pickups. |
| . | CNC
aluminium pipe mover brackets for servo adjustable tuned pipes.
|
|
..
|
|||||||||
| RNVA1 | Radio needle valve. Hardened 4.5mm diameter strong steel needle with 2 o-ring seal. It has a locking nut on the radio arm to adjust the friction on the manual needle. Overall length 45mm | 
 |
no stock
£19.95 |
|||||||||
| WPV | Water protection valve for gas boat fuel tanks. Prevents water entering the fuel tank in the event of a capsize etc. This has a brass and stainless steel valve with a float inside the plastic container. It is connected to the air inlet to the tank. If the boat fills with water the float rises to the top and closes off the valve, if the boat capsizes the float drops and closes off the valve. We have used this on our racing boats for years and it is 100% effective. |
 
|
£19.95 |
|||||||||
| GA2 | Streamlined CNC aluminium streamlined water scoop. Suitable for 3.2 to 4mm tubing |  |
£3.95
|
|||||||||
| GA3 | Streamlined CNC DOUBLE aluminium streamlined scoop. Suitable for 3.2 to 4mm tubing |  |
£5.95
|
|||||||||
| GA4 | Streamlined CNC TRIPLE aluminium streamlined scoop. Suitable for 3.2 to 4mm tubing |   |
£8.95 |
|||||||||
| GA5 | Streamlined aluminium double transom waterscoop. This bolts to the transom of the boat level with the bottom of the hull so there is very little drag Suitable for 3.2 to 4mm tubing |  |
£7.95 |
|||||||||
| GA6A | Small transom mounted big bore water pickup with 4mm pickup tube |
 |
£3.95 |
|||||||||
| GA6 | Large
transom
mounted big bore water pickup with 6mm pickup tube |
 |
£5.95 no stock |
|||||||||
| GA7 | Brass
water pickup and aluminium outlet. The pickup is glued into the
hull.
|
 |
£4.95
|
|||||||||
| GA7A | Water pickup and
outlet. |
 |
£3.95
|
|||||||||
| GA9 | Water-outlet CNC aluminium medium bore. 6mm thread. Suitable for 2.5 to 3.2mm tubing. |  |
£1.80 |
|||||||||
| GA10 | Water-outlet CNC aluminium big bore. 8mm thread. Suitable for 4 to 5mm id tubing. | |
£1.95 |
|||||||||
| GA11 | Through hull nipple aluminium 3mm bore |  |
£1.95
|
|||||||||
| GA11A | Through
hull nipple aluminium BIG BORE 4mm id for silicone 4mm to 5mm id. NEW |
 |
£2.95 |
|||||||||
| GA11B | Through
hull nipple stainless big bore 4mm id for silicone 4mm to 5mm id. |
 |
£4.95
|
|||||||||
| GA12 | Fuel Filter. Very high quality high volume filter for 2.3 to 3.5mm silicone or tygon tubing. Suitable for petrol and nitro fuels. Sintered bronze filter core |  |
£5.95 |
|||||||||
| GA13 | Fuel filler. Fuel Dot. Aluminium 2 part fuel filler for 2.5mm to 4mm silicone or tygon tubing. Suitable for petrol and nitro fuels. | 
 |
£3.95 |
|||||||||
| GA14 | Small all metal tap for fuel or water. Suitable for tubing with id's from 2.5mm to 4mm. (Not suitable as a fuel tap for petrol) | 
 |
£2.75 |
|||||||||
| GA15 | T splitter. Aluminum body brass nipples. For 3 to 4mm silicone tubing (orange) |  |
£3.95 |
|||||||||
| GA16 | Y splitter aluminum body brass nipples. For 3 to 4mm silicone tubing (SILVER) |  |
£3.95 |
|||||||||
| GA16A | 2 x nylon Y pieces for fuel or watercooling tube for 3 to 4mm silicone tubing |  |
£2.40 |
|||||||||
| GA17 | 2 x nylon T pieces for fuel or watercooling tube for 2.5mm to 3.2mm i.d silicone tubing | 
|
£2.40
|
|||||||||
| GA18 | Brass nipple M3 x 2pcs |
 |
£2.00 |
|||||||||
| GA19 | Brass nipple M4 x 2 pcs |
 |
£1.65 |
|||||||||
| GA20 | Brass nipple M5 x 2pcs |  |
£1.65 |
|||||||||
| GA21 | Brass nipple M6 x 2pcs |
 |
£1.75 |
|||||||||
| GA22 | Brass 90 degree nipple M4 x 2pcs. |
 |
no stock £2.45 |
|||||||||
| GA23 | stainless steel 90 degree nipple M5 x 2pcs. |
|
£5.95 |
|||||||||
| GA23 | Brass 90 degree short nipple M5 x 2pcs. |
|
£5.95 |
|||||||||
| GA24 | Brass 90 degree nipple M6 x 2pcs. |
 |
£5.95 |
|||||||||
| GA25 | Rubber bellows
for radio linkages. (4). Pack of 4 bellows.. |
 |
£3.25 |
|||||||||
| GA26 | Rubber bellows for radio linkages through transom to rudder or radio box.. (2). Pack of 2 bellows of a new improved type, the best we have found. 13mm diameter with 10mm hole one end and 1.5mm hole the other. 35mm long |  |
£2.95 |
|||||||||
| GA27 |
2 x Rubber bellows
large diameter for radio linkages. With threaded bolt on aluminium base part.
|
 |
£5.95 |
|||||||||
| GA28 |
2 x Rubber bellows small diameter for radio linkages. With
glue in type aluminium base part.
|
 |
£3.95
|
|||||||||
| GA29 | Aluminium horizontal exhaust mount for 40mm tuned pipe for use on FSRV and mono's (Prestwich 27cc 15cc pipe |  |
no stock £15.50 |
|||||||||
| GA29A | Aluminium horizontal exhaust mount for 50mm tuned pipe for use on mono's (CS28 pipe) | |
no stock £14.50 |
|||||||||
| GA30 | Aluminium exhaust mount with rubbers 36mm id. |  |
£16.95 |
|||||||||
| GA31 | Aluminium vertical exhaust mount with rubbers 40mm id. | |
no stock £18.95 |
|||||||||
| GA32 | Aluminium exhaust mount with rubbers 44mm id. |  |
£21.95 |
|||||||||
| GA33 | Small aluminium oiler cup with stainless steel bracket 21mm diameter, 27mm long. |  |
|
|||||||||
| GA34A | PMB Glowswitch. The best programmable glowswitch for up to 7 amps. Plugs into a Y lead on the throttle servo and switches on the power to the glowplug. Programs easily so that at lowest throttle it is off, at any other position (say 1/8 throttle) it is on and stays on until at a point just below full throttle ( programmed by you), it switches off. Simple single pushbutton setup and setup is retained in the memory. | 
 |
£29.95 |
|||||||||
| GA35 | Aluminium servo mount clamp type for all MINI servos such as Hitec 225 (servo not included) | 
 |
||||||||||
| GA36 | Aluminium servo mount clamp type for all standard servos. (servo not included) |
 |
||||||||||
| GA37 | Aluminium servo mount clamp type for all
1/4 scale 1/5th servos. (servo not included)
NEW |
|
||||||||||
| GA38 | Servo mount for
standard servos, L type aluminium CNC with screws etc.
|
 |
£4.95 |
|||||||||
| GA39 | Dual
aluminium servo mount for standard servos
|
 |
£7.95 |
|||||||||
| GA41 | Aluminium servo mount vertical type for all standard servos with 40mm long bodies. (servo not included) |  |
£7.95
|
|||||||||
| GA43 | Aluminium
lightweight, streamlined strong handle for the side of monos to help
with launching.
|
 |
£5.95 |
|||||||||
| GA44 | Hatch
fastening clips/cowl locks, push down and turn to lock, turn to release.
Anodised aluminium. (2 pcs)
|
  |
£9.95
|
|||||||||
| GA44A | MINI Hatch fastening clips/cowl locks, push down and turn to lock, turn to release. Anodised aluminium. (2 pcs) small enough for FSRV boats, nitro and brushless boats |   |
£7.95
|
|||||||||
| GA45 | O-ring type hatch fastening clips/cowl locks. Billet aluminium with all stainless screws and nuts. (2 sets) |  |
£6.95 |
|||||||||
| GA45A | O-ring spares for GA45 6 pcs |  |
£2.50
|
|||||||||
| GA46 | 2 x spring loaded hatch clips (2) 26mm long x 16mm wide x 812mm high plus pin 15mm long. | 
|
3.50
|
|||||||||
| GA47B | 10 sets of button head M4 12 button socket head screws and steel threaded fittings for fuel tank cover and wing fitting. |  |
£2.75 |
|||||||||
| GA47A | 6 anodised aluminium M4 thumbscrews 16mm long thread |  |
£5.30
|
|||||||||
| GA47C | 6 anodised aluminium M4 thumbnuts |  |
£3.95
|
|||||||||
| GA48 | 2.4g extended aerial. Plug directly into Multiplex, Hitec, Sanwa, Graupner, FRsky or Futaba receivers. 350mm long |
|
£3.95 |
|||||||||
| GA49 | Radio box access screw in
access
assembly. Waterproof .
|
|
£2.95 |
|||||||||
| GA50 | Radio box access
bung. Waterproof . new |
|
£4.95 |
|||||||||
| GA51 | Fuel nozzle for gas boats. Aluminium with magnetic catch and rubber seal |
|
£9.45 |
|||||||||
| GA52 | Small stainless steel polished airscoop/vent. 44mm long 41mm wide 16mm deep |
 |
£2.20 |
|||||||||
| GA53 | Large stainless steel polished airscoop/vent. 54mm long 51mm wide 16mm deep |
|
£2.30 |
|||||||||
| GA55 | Radio box tape. 24mm wide x 25m long roll of waterproof clear tape for radio box sealing and hatch sealing on electric boats. |  |
£4.95 |
|||||||||
| GA57B | 4 x short radio tray mounting feet aluminium M4 15mm long | 
|
||||||||||
| A58 | 4 x long radio tray mounting feet aluminium M3 30mm long |
|
||||||||||
| GA59 | cnc aluminium radio cover fixing.M4 threaded for fixing under the deck 13mm long. The end is blanked off to stop waterleaks into radio compartment. |  |
£1.60 |
|||||||||
| GA59A | Fuel
tank mounting. M4 thread, 16mm high
|
 |
|
|||||||||
| GA59B | 1 x
Lightweight hatch fitting M3 thread, 6.25mm high, 12mm diameter
|
 |
£1.60 |
|||||||||
| GA59C | 1 x Lightweight hatch fitting M4 thread, 6.25mm high, 12mm diameter |
|
£1.60 |
|||||||||
| GA60 | Boat aerial, removable, spring loaded, very strong stainless steel with glass filled nylon base.. Suitable for all boats including carbon and carbon kevlar mouldings. for 35mhz, 40mhz and 27 mhz. 300mm long |
 |
£5.95 |
|||||||||
| GA61 | Boat aerial tube type, suitable for 2.4ghz and 40mhz. Aerial wire fits up inside the tube. 300mm long |
 |
£2.50 |
|||||||||
| GA63 | Starter V belt. Brown, kevlar, cogged, reinforced type. 6mm x 520mm. Suitable for all engines .18 to .91 | 
Click
here for engine Equipment |
£3.75 |
|||||||||
| GA65 | High quality waterproof push pull radio switch for futaba, hitec, sanwa, multiplex etc. |
 |
£12.95 |
|||||||||
| GA66 | Waterproof radio switch for futaba, hitec, sanwa, multiplex etc. includes charging lead | 
 |
£8.95 |
|||||||||
| GA70 | Servo arm cnc aluminium 25T for Futaba, savox, and many others. M3 threads |  |
£1.95 |
|||||||||
| GA70A | Servo arm heavy duty with M3 threads. CNC aluminium 25T for Futaba, savox, and many others |  |
£2.30 |
|||||||||
| GA70B | Double Servo arm with M3 threads. CNC aluminium 25T for Futaba, savox, and many others |  |
£2.45 |
|||||||||
| GA73 | D section closed cell sealing foam for radio hatches etc. Fix with cyano or impact adhesive |
 |
£5.95
|
|||||||||
| GA75 | O section ( 6mm dia) closed cell sealing foam for radio hatches etc. Fix with cyano or impact adhesive. Much better seal than D section. |
|
£2.95
|
|||||||||
| GA76 | Neoprene closed cell sealing foam for radio hatches etc. Self adhesive and bends around corners. 12mm wide 5mm thick. 950mm long | 
|
£4.95 |
|||||||||
| GA77 | Autobailer one way valve for removing water from inside the boat |
 |
£5.80 |
|||||||||
| GA79 | Aluminium deck hook |
|
£5.95 |
|||||||||
| GA82 | Aluminium deck handle silver |
|
£6.95 |
|||||||||
| GA85 | Carbon
plate for servo mounts etc. , very stiff. 200mm x 140mm x 2mm thick, shiny
both sides. Made
with prepreg carbon . |
|
£16.95 |
|||||||||
| GA90 | Carbon
angle shiny both sides. 2mm x 190mm x 15mm x 15mm for radio bars,
servo mounts etc. |
|
£19.25 |
|||||||||
| GA91 | Carbon
angle shiny both sides. 2mm x 190mm x 25mm x 25mm thick for radio bars,
servo mounts etc. |
|
£19.95 |
|||||||||
| GA92 | Carbon
angle shiny both sides. 190mm x 15mm x 15mm x 1mm thick for radio bars,
servo mounts etc.
|
|
£16.95 |
|||||||||
| GA93 | Carbon
angle shiny both sides. 190mm x 25mm x 25mm x 1mm thick for radio bars,
servo mounts etc. |
|
£17.95 |
|||||||||
| GA95 | Electric water or fuel pump 6v to 12 volt. (suitable for nitro fuel or petrol) |
|
£17.95 |
|||||||||
| GA113 | 10
plated steel spring clips for 6mm to 7mm od silicone tubing
|
 |
£2.35 |
|||||||||
| GA114 | 10
plated steel spring clips for 7mm to 8.5mm od silicone tubing
|
 |
£2.35 |
|||||||||
| GA119 | Tygon GENUINE fuel tubing 3.2mm inside diameter. This is the very soft flexible type of tubing suitable for petrol (gas). 1 metre |  |
£11.50
|
|||||||||
| GA119A | Tygon TYPE fuel tubing 3.2mm inside diameter. This is soft flexible type of tubing suitable for petrol (gas). 1 metre | |
£4.50
|
|||||||||
| GA120 | Silicone fuel tube for nitro, glow motors only. ca. 2mm bore. 2 metre. |
|
£3.95 |
|||||||||
| G121 | Silicone Water-tube ca. 3mm bore 6mm od. 2 metres. Also use as fuel tube for .90 motors |
|
£3.95 |
|||||||||
| GA122 | Silicone big bore water-tube 4mm bore, 7mm od. 2 metres. |
|
£3.95
|
|||||||||
| GA123 | Silicone big bore water-tube 5mm bore, 8mm od. 2 metres. |
|
£4.95
|
|||||||||
| GA124 | Silicone exhaust tube. High temperature 100mm long. 13mm, inside. |  |
£2.30 |
|||||||||
| GA124A | Silicone exhaust tube. High temperature 100mm long. 16mm, inside. | |
£2.50 |
|||||||||
| GA125 | Silicone exhaust tube suitable for high temperature. 100mm long. 19mm inside. |  |
£3.00 |
|||||||||
| GA126 | Silicone exhaust tube suitable for high temperature. 100mm long. 22mm inside. |  |
£3.95 |
|||||||||
| RL1 | 10
pieces of servo arm pushrod linkages for up to 2.1mm pushrods.
|
 |
£3.00 |
|||||||||
| RL1A | 2 x aluminium heavy duty ball link with spring loaded lock. Easy release for 2mm pushrods. | 
 |
£5.95 no stock |
|||||||||
| RL1B | Dubro heavy duty ball link with screw adjustment on ball. For 4.40 size pushrods or the hole can be enlarged and threaded M4. |  |
£4.95 |
|||||||||
| RL1C | 2 x
aluminium screw on clevis. Suitable for 2mm pushrods.
|
 |
£4.55 |
|||||||||
| RL2 | Wire centred control cable 1.6mm diameter with nylon outer tube (bowden cable). 1 metre |  |
£3.95 |
|||||||||
| RL3 | Cable ends. Solder or crimp on type. M2 thread . Fixes onto 1.5 to 2mm pushrods. 4 pieces |  |
£2.50 |
|||||||||
| RL5 | Quicklink. Metal servo arm and throttle arm connector. M2 thread. 5 pcs |  |
£2.80 |
|||||||||
| RL6 | 5 x steel pushrod 2mm diameter 300mm long. Threaded one end M2. |  |
£2.45 |
|||||||||
| RL7 | Plastic screw type nipple link for cables or plain end of pushrod. 2pcs to fit 1.5mm and 2mm pushrods. |  |
No
stock £2.95 |
|||||||||
| RL8 | CNC aluminium pushrod joiner to fit 1.5mm and 2mm pushrods. |  |
£2.95 |
|||||||||
| RL9 | Double ended balljointed rudder link with very strong Dubro adjustable ballinks with threaded rod. |  |
£10.95 |
|||||||||
| RL10 | Pushrod throttle link with 2 x balljoints and stainless steel connector with 2 threaded 1.5mm pushrods. 300mm long adjustable for length |  |
£4.95
|
|||||||||
| RL11 | 300mm Rudder pushrod 2.8mm diameter with heavy duty quicklink |  |
£3.40
|
