|
submerged drive rudders
| This section contains
Rubber couplings, huco type and Kalistratov couplings plus ballraced prop
shafts all with a sealed ballrace, lead/teflon bush and grease nipple. The
propeller shafts are stainless steel with M5 threads for the props.
Skegs are supplied for the shafts. The quiet rubber mounts with silentbloc
rubbers will reduce vibration and noise and allow the model engine to be
easily fitted and removed. The rudders are all stainless steel and
waterproof. The rudder (tiller) arms are strong and mostly double sided. |
| WP13 |
Brass
rudder assembly small. rudder blade is 42mm deep, 33mm wide
at the top, 22mm wide at the bottom |
|
£7.95
|
| WP14 |
Brass
rudder assembly medium. rudder blade is 52mm deep, 36mm wide
at the top, 25mm wide at the bottom |
|
£7.95
|
| WP15 |
Brass
rudder assembly, very large. rudder blade is 67mm deep, 44mm
wide at the top, 27mm wide at the bottom |
|
£8.95
|
| WP23 |
Rudder
medium for 3.5cc and 7.5cc, waterproof with water
overflow system.
CNC aluminium body has INA type waterproof seal at the top
with 2 sintered bronze oilite bushes.
5mm hard
stainless shaft silicon bronze welded to laser cut stainless
steel blade rudder blade 60mm deep, 41 wide at top, 31
wide at bottom. |
 |
£24.95
|
| WP24 |
Rudder
large, same as above but
larger size for 15cc and gas boats boats.
CNC aluminium body has INA type waterproof seal at the top
with 2 sintered bronze oilite bushes. 5mm hard stainless shaft silicon bronze welded welded to
laser cut stainless steel blade. Rudder blade 70mm deep
for 15cc T5, T6 and gasboats. |
|
£24.95
|
| WP2 |
2
x Rudder shaft seals 9mm od, 5mm id, 2mm wide |
 |
£3.95
|
| WP4 |
Spare
rudder 3.5cc and 7.5cc. blade 60mm deep. 5mm diameter shaft with 1.5mm
thick blade
The rudder shaft and rudder
blade are both slotted so that they lock together and then
they are silver soldered together. Very strong.
|
 |
£7.95 |
| WP5 |
Spare
rudder 15cc and 27cc. blade 71mm deep. 5mm diameter shaft with
1.5mm thick blade
The rudder shaft and rudder
blade are both slotted so that they lock together and then
they are silver soldered together. Very strong.
|
|
£8.50 |
| WP6A |
Aluminium
CNC machined double-sided rudder arm, 5mm bore. |
 |
£5.50
|
| WP6BB |
Aluminium
CNC machined double-sided rudder arm, 4mm bore. |
 |
£4.50
|
| WP6C |
Aluminium
CNC machined single-sided rudder arm, 5mm bore. |
 |
£4.50
|
| WP6D |
Aluminium
CNC machined single-sided rudder arm, 4mm bore. |
|
£4.50 |
| WP6E |
Aluminium
CNC machined single-sided rudder arm, 3mm bore. |
|
£4.50 |
|
Copyright Dave Marles