PMB Model
Boats
email here
phone 07842
634090
ProBoat and Aquacraft SHAFTS and Spares
Home
Octura Propellers
TigerKing
engines Hardware
Parts
Gas nitro Flexishafts
| The flexi shafts below are a direct fit for the proboat, aquacraft and Pursuit boats listed. They use upgraded higher quality flex cable with thicker strands and are more accurately aligned with a plain shaft part that is only 57mm long which reduces drag. These shafts will allow easier strut adjustment and because the flexishafts are more accurate they will reduce vibrations making strut bush life better and giving more speed. These proboat replacement flex shafts have hardened steel drive dogs fitted. |
| TEFPRO | TEFLON liner for all of the shafts listed below. | . | £2.00
|
| BJ29V3 | FLEXISHAFT for PROBOAT BLACKJACK 29 V3, GEICO 29 V3 , 305mm long. flex shaft. 3/16 stubshaft 3.9mm flex shaft |  |
£21.50
|
| BJ29V1 | FLEXISHAFT for PROBOAT BLACKJACK 29 V1 (3.8mm) with 3/16 stubshaft 325mm long.3/16 stubshaft 3.9mm flex shaft | |
£21.50
|
| IMP31 | FLEXISHAFT for PRO BOAT IMPULSE 31 V3 215mm long.3/16 stubshaft 3.9mm flex shaft. | |
£21.50
|
| VELES1 | FLEXISHAFT for PRO BOAT Veles 335mm long.3/16 stubshaft 3.9mm flex shaft | |
£21.50
|
| REVOLT1 | FLEXISHAFT for AQUCRAFT REVOLT 196mm long 3/16 stubshaft 3.9mm flex shaft | |
£21.50
|
| WAKE | FLEXISHAFT for Proboat Sonic Wake 36. 240mm long. This cable has a 3.16 (4.75mm) cable and 3/16 stubshaft. Complete with drive dog |  |
£21.50
|
| PURS316 | FLEXISHAFT for TFL PURSUIT with stinger drive 262mm long. This cable has a 3.16 (4.75mm) cable and 3/16 stubshaft. Some older Pursuit had 3.8mm cable. | |
£21.50
|