|
MINI KRAKEN 36 |
|
|
This is our new 3.5cc nitro
racing mono that we designed and developed to race at the IMBRA World
Championships in 2018. 900mm 36 inches long. Designed like the
larger Kraken 52 with high tapered sides to prevent diving in the
corners and it has full length rails for speed. |
|
| All of our racing boats are
made from epoxy and glass or carbon kevlar and are vacuum moulded with
multiple layers of material. This gives a very light and strong moulding
which is far better than normal fibreglass. Do not confuse these
boats with normal fibreglass boats. These are top quality lightweight
epoxy mouldings made with up to 5 layers of glass or 4 layers of
glass one of carbon and kevlar and slow setting epoxy resin which
means no distortion, no gel coat cracks and they are VERY strong. These
boats are hand laid up in a ceramic mould. The mould and moulding are
vacuum bagged and left in an oven for 16 hours at 50C and then post cured
at 25C for 24 hours after removal from the mould. They are then
joined with kevlar or glass and again cured overnight in the oven. This
makes for an extremely strong, stiff and lightweight racing boat. Carbon
kevlar is incredibly difficult to damage. The engine tank cover is
made from epoxy glass to prevent radio problems. |
|
|
|
|
|
MINI Kraken 36 (EK) Carbon/ Kevlar Epoxy.
Standard racing version of Kraken. Carbon/kevlar epoxy hull and
glass/epoxy engine cover. This boat is NOT painted and is supplied with
carbon/kevlar patterned hull and translucent epoxy engine cover. Suitable
for geared 3.5cc nitro.
|
£275.00 |
| Mini Kraken 36 cover
in glass |
£60.00 |
Mini KRAKEN 36 cover in carbon |
£75.00 |
