FSRV Boats PULSAR
BRITISH
INTERNATIONAL 2012
Winner Dean Lord with PULSAR
|
|
|
Pulsar
7.5cc 2012. The
Pulsar is longer and wider but lower than the Pegasus. It is incredibly
stable and was used by Dean Lord to win the British International at
Billing UK against tough competition. He used a modified Vac 45 engine
1.5:1 gear ratio and 2227 propeller. 3rd place was also a Pulsar
with VAC 45.
|
|
|
|
|
|
|
|
|
PUL3 |
Pulsar
moulded from epoxy carbon/kevlar and made with vacuum for very high
strength and stiffness. Joined in the mould with separate epoxy
glass tank and engine cover. |
|
£394.00
|
PUL4 |
Pulsar
moulded from epoxy glass and made with vacuum for very high strength
and stiffness. Joined in the mould with separate epoxy
glass tank
and engine cover. |
. |
£350.00
|
PUL5 |
Tank/engine
cover in epoxy glass |
. |
£35.00
|
PUL6 |
Tank/engine
cover in carbon/kevlar glass |
|
£50.00
|
PUL8 |
Carbon wing
for Pulsar.
Made from vacuum moulded carbon/epoxy. Wing is cut oversize and must
be finished by the buyer. |
. |
£23.00
|
|
Prototype used PULSAR epoxy
vacuum carbon/glass boat with tank cover and tuned CMB45VAC on the
Prestwich PMB gearbox and 2227 Mocom propeller. Other parts used.
BR87 propshaft, WP23 rudder, PT4A fuel tank, CS20 tuned pipe at 230mm
length, GA1A waterscoop, PT13 fuel tank mounting, CNC1 coupling,
XX4A radio hatch cover, GA13 servo mounting tray, 2 trim tabs GA17, FC2
float chamber, CW1 carbon wing. |
|
|